Node Callbacks

Callbacks

This is the most important topic to understand if you want to understand how to use node. Nearly everything in node uses callbacks. They weren't invented by node, they are just part of the JavaScript language.

Callbacks are functions that are executed asynchronously, or at a later time. Instead of the code reading top to bottom procedurally, async programs may execute different functions at different times based on the order and speed that earlier functions like http requests or file system reads happen.

The difference can be confusing since determining if a function is asynchronous or not depends a lot on context. Here is a simple synchronous example, meaning you can read the code top to bottom just like a book:

var myNumber = 1
function addOne() { myNumber++ } // define the function
addOne() // run the function
console.log(myNumber) // logs out 2

The code here defines a function and then on the next line calls that function, without waiting for anything. When the function is called it immediately adds 1 to the number, so we can expect that after we call the function the number should be 2. This is the expectation of synchronous code - it sequentially runs top to bottom.

Node, however, uses mostly asynchronous code. Let's use node to read our number from a file callednumber.txt:

var fs = require('fs') // require is a special function provided by node
var myNumber = undefined // we don't know what the number is yet since it is stored in a file

function addOne() {
  fs.readFile('number.txt', function doneReading(err, fileContents) {
    myNumber = parseInt(fileContents)
    myNumber++
  })
}

addOne()

console.log(myNumber) // logs out undefined -- this line gets run before readFile is done

Why do we get undefined when we log out the number this time? In this code we use thefs.readFile method, which happens to be an asynchronous method. Usually things that have to talk to hard drives or networks will be asynchronous. If they just have to access things in memory or do some work on the CPU they will be synchronous. The reason for this is that I/O is reallyyy reallyyy sloowwww. A ballpark figure would be that talking to a hard drive is about 100,000 times slower than talking to memory (e.g. RAM).

When we run this program all of the functions are immediately defined, but they don't all execute immediately. This is a fundamental thing to understand about async programming. When addOne is called it kicks off a readFile and then moves on to the next thing that is ready to execute. If there is nothing to execute node will either wait for pending fs/network operations to finish or it will stop running and exit to the command line.

When readFile is done reading the file (this may take anywhere from milliseconds to seconds to minutes depending on how fast the hard drive is) it will run the doneReading function and give it an error (if there was an error) and the file contents.

The reason we got undefined above is that nowhere in our code exists logic that tells theconsole.log statement to wait until the readFile statement finishes before it prints out the number.

If you have some code that you want to be able to execute over and over again or at a later time the first step is to put that code inside a function. Then you can call the function whenever you want to run your code. It helps to give your functions descriptive names.

Callbacks are just functions that get executed at some later time. The key to understanding callbacks is to realize that they are used when you don't know when some async operation will complete, but you do know where the operation will complete — the last line of the async function! The top-to-bottom order that you declare callbacks does not necessarily matter, only the logical/hierarchical nesting of them. First you split your code up into functions, and then use callbacks to declare if one function depends on another function finishing.

The fs.readFile method is provided by node, is asynchronous and happens to take a long time to finish. Consider what it does: it has to go to the operating system, which in turn has to go to the file system, which lives on a hard drive that may or may not be spinning at thousands of revolutions per minute. Then it has to use a laser to read data and send it back up through the layers back into your javascript program. You give readFile a function (known as a callback) that it will call after it has retrieved the data from the file system. It puts the data it retrieved into a javascript variable and calls your function (callback) with that variable, in this case the variable is called fileContents because it contains the contents of the file that was read.

Think of the restaurant example at the beginning of this tutorial. At many restaurants you get a number to put on your table while you wait for your food. These are a lot like callbacks. They tell the server what to do after your cheeseburger is done.

Let's put our console.log statement into a function and pass it in as a callback.

var fs = require('fs')
var myNumber = undefined

function addOne(callback) {
  fs.readFile('number.txt', function doneReading(err, fileContents) {
    myNumber = parseInt(fileContents)
    myNumber++
    callback()
  })
}

function logMyNumber() {
  console.log(myNumber)
}

addOne(logMyNumber)

Now the logMyNumber function can get passed in an argument that will become the callbackvariable inside the addOne function. After readFile is done the callback variable will be invoked (callback()). Only functions can be invoked, so if you pass in anything other than a function it will cause an error.

When a function gets invoked in javascript the code inside that function will immediately get executed. In this case our log statement will execute since callback is actually logMyNumber. Remember, just because you define a function it doesn't mean it will execute. You have to invoke a function for that to happen.

To break down this example even more, here is a timeline of events that happen when we run this program:

• 1: the code is parsed, which means if there are any syntax errors they would make the program break. During this initial phase there are 4 things that get defined: fs, myNumber, addOne, andlogMyNumber. Note that these are just being defined, no functions have been called/invoked yet.
• 2: When the last line of our program gets executed addOne gets invoked, getting passed in thelogMyNumber function as callback, which is what we want to be called when addOne is complete. This immediately causes the asynchronous fs.readFile function to kick off. This part of the program takes a while to finish.
• 3: with nothing to do, node idles for a bit as it waits for readFile to finish. If there was anything else to do during this time, node would be available for work.
• 4: readFile finishes and calls its callback, doneReading, which then in turn increments the number and then immediately invokes the function that addOne passed in (its callback),logMyNumber.

Perhaps the most confusing part of programming with callbacks is how functions are just objects that can be stored in variables and passed around with different names. Giving simple and descriptive names to your variables is important in making your code readable by others. Generally speaking in node programs when you see a variable like callback or cb you can assume it is a function.

You may have heard the terms 'evented programming' or 'event loop'. They refer to the way thatreadFile is implemented. Node first dispatches the readFile operation and then waits forreadFile to send it an event that it has completed. While it is waiting node can go check on other things. Inside node there is a list of things that are dispatched but haven't reported back yet, so node loops over the list again and again checking to see if they are finished. After they finished they get 'processed', e.g. any callbacks that depended on them finishing will get invoked.

Here is a pseudocode version of the above example:

function addOne(thenRunThisFunction) {
  waitAMinute(function waitedAMinute() {
    thenRunThisFunction()
  })
}

addOne(function thisGetsRunAfterAddOneFinishes() {})

Imagine you had 3 async functions a, b and c. Each one takes 1 minute to run and after it finishes it calls a callback (that gets passed in the first argument). If you wanted to tell node 'start running a, then run b after a finishes, and then run c after b finishes' it would look like this:

a(function() {
  b(function() {
    c()
  })
})

When this code gets executed, a will immediately start running, then a minute later it will finish and call b, then a minute later it will finish and call c and finally 3 minutes later node will stop running since there would be nothing more to do. There are definitely more elegant ways to write the above example, but the point is that if you have code that has to wait for some other async code to finish then you express that dependency by putting your code in functions that get passed around as callbacks.

The design of node requires you to think non-linearly. Consider this list of operations:

read a file
process that file

If you were to turn this into pseudocode you would end up with this:

var file = readFile()
processFile(file)

This kind of linear (step-by-step, in order) code isn't the way that node works. If this code were to get executed then readFile and processFile would both get executed at the same exact time. This doesn't make sense since readFile will take a while to complete. Instead you need to express thatprocessFile depends on readFile finishing. This is exactly what callbacks are for! And because of the way that JavaScript works you can write this dependency many different ways:

var fs = require('fs')
fs.readFile('movie.mp4', finishedReading)

function finishedReading(error, movieData) {
  if (error) return console.error(error)
  // do something with the movieData
}

But you could also structure your code like this and it would still work:

var fs = require('fs')

function finishedReading(error, movieData) {
  if (error) return console.error(error)
  // do something with the movieData
}

fs.readFile('movie.mp4', finishedReading)

Or even like this:

var fs = require('fs')

fs.readFile('movie.mp4', function finishedReading(error, movieData) {
  if (error) return console.error(error)
  // do something with the movieData
})