Linux添加新磁盘

简介: 查看磁盘添加状态 添加完成磁盘之后使用fdisk -l查看磁盘是否添加成功,可以看到有一块设备名为/dev/sdb1的硬盘为添加 [root@localhost ~]# fdisk -l Disk /dev/sda: 53.

查看磁盘添加状态

添加完成磁盘之后使用fdisk -l查看磁盘是否添加成功,可以看到有一块设备名为/dev/sdb1的硬盘为添加

[root@localhost ~]# fdisk -l
 
Disk /dev/sda: 53.7 GB, 53687091200 bytes, 104857600 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x000d3f20
 
   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048     2099199     1048576   83  Linux
/dev/sda2         2099200   104857599    51379200   8e  Linux LVM
^[[D
Disk /dev/mapper/centos-root: 48.4 GB, 48444211200 bytes, 94617600 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
 
 
Disk /dev/mapper/centos-swap: 4160 MB, 4160749568 bytes, 8126464 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
 
 
Disk /dev/sdb: 53.7 GB, 53687091200 bytes, 104857600 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes

添加新分区

[root@localhost ~]# fdisk /dev/sdb 
Welcome to fdisk (util-linux 2.23.2).
 
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
 
Device does not contain a recognized partition table
Building a new DOS disklabel with disk identifier 0x98c0a701.
 
Command (m for help): n
Partition type:
   p   primary (0 primary, 0 extended, 4 free)
   e   extended
Select (default p): p
Partition number (1-4, default 1): 
First sector (2048-104857599, default 2048): 
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-104857599, default 104857599): 
Using default value 104857599
Partition 1 of type Linux and of size 50 GiB is set
 
Command (m for help): w
The partition table has been altered!
 
Calling ioctl() to re-read partition table.
Syncing disks.

使用fdisk命令选中/dev/sdb1设备进行添加磁盘操作
当弹出Command (m for help):时输入n进行新建分区操作
然后输入p进行新建主分区,如果只新建一个分区可以一路回车操作
最后输入w进行保存

确认分区创建情况

再次查看是否创建成功

[root@localhost ~]# fdisk -l
 
Disk /dev/sda: 53.7 GB, 53687091200 bytes, 104857600 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x000d3f20
 
   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048     2099199     1048576   83  Linux
/dev/sda2         2099200   104857599    51379200   8e  Linux LVM
 
Disk /dev/mapper/centos-root: 48.4 GB, 48444211200 bytes, 94617600 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
 
 
Disk /dev/mapper/centos-swap: 4160 MB, 4160749568 bytes, 8126464 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
 
 
Disk /dev/sdb: 53.7 GB, 53687091200 bytes, 104857600 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x98c0a701
 
   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1            2048   104857599    52427776   83  Linux

显示已经创建成功

新建分区格式化

输入mkfs.ext4 /dev/sdb1将sdb1进行格式化

[root@localhost ~]# mkfs.ext4 /dev/sdb1
mke2fs 1.42.9 (28-Dec-2013)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
3276800 inodes, 13106944 blocks
655347 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=2162163712
400 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks: 
    32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 
    4096000, 7962624, 11239424
 
Allocating group tables: done                            
Writing inode tables: done                            
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information:        
done

挂载完成

[root@localhost ~]# mount /dev/sdb1 /data
[root@localhost ~]# df -HT
Filesystem              Type      Size  Used Avail Use% Mounted on
/dev/mapper/centos-root xfs        49G  5.6G   43G  12% /
devtmpfs                devtmpfs  2.0G     0  2.0G   0% /dev
tmpfs                   tmpfs     2.0G     0  2.0G   0% /dev/shm
tmpfs                   tmpfs     2.0G   13M  2.0G   1% /run
tmpfs                   tmpfs     2.0G     0  2.0G   0% /sys/fs/cgroup
/dev/sda1               xfs       1.1G  149M  915M  14% /boot
tmpfs                   tmpfs     396M     0  396M   0% /run/user/0
/dev/sdb1               ext4       53G   55M   50G   1% /data
目录
相关文章
|
25天前
|
Linux Shell C语言
【Shell 命令集合 磁盘维护 】Linux 分区管理的工具 sfdisk命令使用教程
【Shell 命令集合 磁盘维护 】Linux 分区管理的工具 sfdisk命令使用教程
29 1
|
25天前
|
存储 Shell Linux
【Shell 命令集合 磁盘维护 】Linux 管理硬盘分区 mpartition命令使用教程
【Shell 命令集合 磁盘维护 】Linux 管理硬盘分区 mpartition命令使用教程
35 1
|
25天前
|
存储 Shell Linux
【Shell 命令集合 磁盘维护 】Linux mkfs.ext2 命令使用教程
【Shell 命令集合 磁盘维护 】Linux mkfs.ext2 命令使用教程
36 1
|
25天前
|
存储 Shell Linux
【Shell 命令集合 磁盘维护 】Linux 创建DOS文件系统 mkdosfs命令使用指南
【Shell 命令集合 磁盘维护 】Linux 创建DOS文件系统 mkdosfs命令使用指南
31 2
|
25天前
|
存储 算法 Shell
【Shell 命令集合 磁盘维护 】Linux 创建启动磁盘 mkbootdisk命令使用教程
【Shell 命令集合 磁盘维护 】Linux 创建启动磁盘 mkbootdisk命令使用教程
27 1
|
25天前
|
存储 安全 Shell
【Shell 命令集合 磁盘维护 】Linux mformat 命令使用教程
【Shell 命令集合 磁盘维护 】Linux mformat 命令使用教程
28 0
|
25天前
|
Shell Linux API
【Shell 命令集合 磁盘维护 】Linux 查找指定目录下的所有符号链接文件 symlinks 命令使用教程
【Shell 命令集合 磁盘维护 】Linux 查找指定目录下的所有符号链接文件 symlinks 命令使用教程
31 1
|
25天前
|
Shell Linux C语言
【Shell 命令集合 磁盘维护 】Linux 创建一个初始化内存盘 mkinitrd命令使用教程
【Shell 命令集合 磁盘维护 】Linux 创建一个初始化内存盘 mkinitrd命令使用教程
33 0
|
25天前
|
存储 Shell Linux
【Shell 命令集合 磁盘维护 】Linux 创建Minix文件系统 mkfs.minix 命令使用教程
【Shell 命令集合 磁盘维护 】Linux 创建Minix文件系统 mkfs.minix 命令使用教程
33 0
|
25天前
|
存储 Shell Linux
【Shell 命令集合 磁盘维护 】Linux 建立ext2文件系统 mke2fs命令使用教程
【Shell 命令集合 磁盘维护 】Linux 建立ext2文件系统 mke2fs命令使用教程
30 2