在VMWARE虚拟机下安装RHEL7.0,启动时有以下提示。经网上搜索,答复为floppy及piix4_smbus设备加载时找不到设备所致。

wKiom1S2Nveh1RxeAAFJu7VL4TY402.jpg

  解决办法如下:

floppy,在BIOS里禁用软驱,重启

piix4_smbus,先检查一下是否有加载piix4,如有把i2c_piix4加入黑名单,启动时不加载此模块

# lsmod | grep i2c_piix4

# vi  /etc/modprobe.d/blacklist.conf

blacklist i2c_piix4


其他的方法可参考

Added 

  • blacklist floppy

to 
/etc/modprobe.d/blacklist.conf
and rebooted


Added 

  • alias floppy off

to 
/etc/modprobe.conf
and rebooted


disable the floppy kernel module by doing this:

  • echo "blacklist floppy" | sudo tee /etc/modprobe.d/nofloppy.conf

The only real solution is to disable the floppy driven in your vm's BIOS (as mentioned by gerald_clark)


官方文档的方法:

Boot pauses probing floppy device

On some machines (mostly laptops with removable floppy drives), boot will pause while the (non-existant) floppy device is probed. A series of the following messages will appear:

end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0

This is caused by initrd's nash searching for filesystem labels on the floppy device. This problem can be avoided by adding floppy.allowed_drive_mask=0 to the kernel boot options.