查询v$session_longops动态性能视图可以查看运行时间大于6秒的查询，如果想让运行时间大于6秒的查询被数据库引擎收集，必须满足以下条件：1 参数timed_statistics或sql_trace为true
2 涉及的对象（表或索引）必须被分析（analyze或dbms_stats）

监控数据库性能的SQL

[Ref: http://xzh2000.itpub.net/post/96/102574 ]

在v$session_longops视图中，sofar字段表示已经扫描的块数，totalwork表示总得需要扫描的块数，所以我们即可以对正在运行的长查询进行监控，比如在索引创建时，查看索引创建的进度，也可以查看系统中以往的长查询。。。

col opname format a32
col target_desc format a32
col perwork format a12
set lines 131
select sid,OPNAME,TARGET_DESC,sofar,TOTALWORK,trunc(sofar/totalwork*100,2)||'%' as perwork 
from v$session_longops where sofar!=totalwork;

set lines 121
set pages 999
col opname format a29
col target format a29
col target_desc format a12
col perwork format a12
col remain format 99
col start_time format a21
col sofar format 99999999
col totalwork format 99999999
col sql_text format a101
col bufgets format 99999999

select opname,target,to_char(start_time,'yy-mm-dd:hh24:mi:ss') start_time,elapsed_seconds elapsed,
executions execs,buffer_gets/decode(executions,0,1,executions) bufgets,module,sql_text
from v$session_longops sl,v$sqlarea sa
where sl.sql_hash_value = sa.hash_value and upper(substr(module,1,4)) <> 'RMAN' and substr(opname,1,4) <> 'RMAN' 
and module <> 'SQL*Plus' and sl.start_time>trunc(sysdate)
order by start_time;

==========================================================

1. 监控事例的等待

select event,sum(decode(wait_Time,0,0,1)) "Prev",
sum(decode(wait_Time,0,1,0)) "Curr",count(*) "Tot"
from v$session_Wait
group by event order by 4;

2. 回滚段的争用情况

select name, waits, gets, waits/gets "Ratio"
from v$rollstat a, v$rollname b
where a.usn = b.usn;

3. 监控表空间的 I/O 比例

select df.tablespace_name name,df.file_name "file",f.phyrds pyr,
f.phyblkrd pbr,f.phywrts pyw, f.phyblkwrt pbw
from v$filestat f, dba_data_files df
where f.file# = df.file_id
order by df.tablespace_name;

4. 监控文件系统的 I/O 比例

select substr(a.file#,1,2) "#", substr(a.name,1,30) "Name",
a.status, a.bytes, b.phyrds, b.phywrts
from v$datafile a, v$filestat b
where a.file# = b.file#;

5.在某个用户下找所有的索引

select user_indexes.table_name, user_indexes.index_name,uniqueness, column_name
from user_ind_columns, user_indexes
where user_ind_columns.index_name = user_indexes.index_name
and user_ind_columns.table_name = user_indexes.table_name
order by user_indexes.table_type, user_indexes.table_name,
user_indexes.index_name, column_position;

6. 监控 SGA 的命中率

select a.value + b.value "logical_reads", c.value "phys_reads",
round(100 * ((a.value+b.value)-c.value) / (a.value+b.value)) "BUFFER HIT RATIO"
from v$sysstat a, v$sysstat b, v$sysstat c
where a.statistic# = 38 and b.statistic# = 39
and c.statistic# = 40;

7. 监控 SGA 中字典缓冲区的命中率

select parameter, gets,Getmisses , getmisses/(gets+getmisses)*100 "miss ratio",
(1-(sum(getmisses)/ (sum(gets)+sum(getmisses))))*100 "Hit ratio"
from v$rowcache
where gets+getmisses <>0
group by parameter, gets, getmisses;

8. 监控 SGA 中共享缓存区的命中率，应该小于1%

select sum(pins) "Total Pins", sum(reloads) "Total Reloads",
sum(reloads)/sum(pins) *100 libcache
from v$librarycache;

select sum(pinhits-reloads)/sum(pins) "hit radio",sum(reloads)/sum(pins) "reload percent"
from v$librarycache;

9. 显示所有数据库对象的类别和大小

select count(name) num_instances ,type ,sum(source_size) source_size ,
sum(parsed_size) parsed_size ,sum(code_size) code_size ,sum(error_size) error_size,
sum(source_size) +sum(parsed_size) +sum(code_size) +sum(error_size) size_required
from dba_object_size
group by type order by 2;

10. 监控 SGA 中重做日志缓存区的命中率，应该小于1%

SELECT name, gets, misses, immediate_gets, immediate_misses,
Decode(gets,0,0,misses/gets*100) ratio1,
Decode(immediate_gets+immediate_misses,0,0,
immediate_misses/(immediate_gets+immediate_misses)*100) ratio2
FROM v$latch WHERE name IN ('redo allocation', 'redo copy');

11. 监控内存和硬盘的排序比率，最好使它小于 .10，增加 sort_area_size

SELECT name, value FROM v$sysstat WHERE name IN ('sorts (memory)', 'sorts (disk)');

12. 监控当前数据库谁在运行什么SQL语句

SELECT osuser, username, sql_text from v$session a, v$sqltext b
where a.sql_address =b.address order by address, piece;

13. 监控字典缓冲区

SELECT (SUM(PINS - RELOADS)) / SUM(PINS) "LIB CACHE" FROM V$LIBRARYCACHE;
SELECT (SUM(GETS - GETMISSES - USAGE - FIXED)) / SUM(GETS) "ROW CACHE" FROM V$ROWCACHE;
SELECT SUM(PINS) "EXECUTIONS", SUM(RELOADS) "CACHE MISSES WHILE EXECUTING" FROM V$LIBRARYCACHE;

后者除以前者,此比率小于1%,接近0%为好。

SELECT SUM(GETS) "DICTIONARY GETS",SUM(GETMISSES) "DICTIONARY CACHE GET MISSES"
FROM V$ROWCACHE

14. 找ORACLE字符集

select * from sys.props$ where name='NLS_CHARACTERSET';

15. 监控 MTS

select busy/(busy+idle) "shared servers busy" from v$dispatcher;

此值大于0.5时，参数需加大

select sum(wait)/sum(totalq) "dispatcher waits" from v$queue where type='dispatcher';
select count(*) from v$dispatcher;
select servers_highwater from v$mts;

servers_highwater接近mts_max_servers时，参数需加大

16. 碎片程度

select tablespace_name,count(tablespace_name) from dba_free_space group by tablespace_name
having count(tablespace_name)>10;

alter tablespace name coalesce;
alter table name deallocate unused;

create or replace view ts_blocks_v as
select tablespace_name,block_id,bytes,blocks,'free space' segment_name from dba_free_space
union all
select tablespace_name,block_id,bytes,blocks,segment_name from dba_extents;

select * from ts_blocks_v;

select tablespace_name,sum(bytes),max(bytes),count(block_id) from dba_free_space
group by tablespace_name;

查看碎片程度高的表

SELECT segment_name table_name , COUNT(*) extents
FROM dba_segments WHERE owner NOT IN ('SYS', 'SYSTEM') GROUP BY segment_name
HAVING COUNT(*) = (SELECT MAX( COUNT(*) ) FROM dba_segments GROUP BY segment_name);

17. 表、索引的存储情况检查

select segment_name,sum(bytes),count(*) ext_quan from dba_extents where
tablespace_name='&tablespace_name' and segment_type='TABLE' group by tablespace_name,segment_name;

select segment_name,count(*) from dba_extents where segment_type='INDEX' and owner='&owner'
group by segment_name;

18、找使用CPU多的用户session

12是cpu used by this session

select a.sid,spid,status,substr(a.program,1,40) prog,a.terminal,osuser,value/60/100 value
from v$session a,v$process b,v$sesstat c
where c.statistic#=12 and c.sid=a.sid and a.paddr=b.addr order by value desc;

转自：http://xsb.itpub.net/post/419/105941

-----------

查看等待事件

--v$session_wait视图中的p1、p2、p3表示等待事件的具体含义，如果Wait Event是db file scattered read,那么p1=file_id/p2=block_id/p3=blocks,然后通过dba_extents即可

确定出热点对象.
--如果是latch free的话,那么p2为闩锁号,它指向v$latch.

--求等待事件及其对应的latch
col event format a32;
col name format a32;
select sid,event,p1 as "p1 as file_id", p2 as "p2 as block_id/latch", p3 as "p3 as blocks",l.name
from v$session_wait sw,v$latch l 
where event not like '%SQL%' and event not like '%rdbms%' and event not like '%mon%' and sw.p2 = l.latch#(+);

--求等待事件及其热点对象
col owner format a18;
col segment_name format a32;
col segment_type format a32;
select owner, segment_name, segment_type from dba_extents
where file_id = &file_id and &block_id between block_id and block_id + &blocks - 1;

--综合以上两条SQL,同时显示latch及热点对象(速度较慢)
select sw.sid, event, l.name, de.segment_name from v$session_wait sw, v$latch l, dba_extents de
where event not like '%SQL%' and event not like '%rdbms%' and event not like '%mon%'
and sw.p2 = l.latch#(+) and sw.p1 = de.file_id(+) and p2 between de.block_id and de.block_id + de.blocks - 1;

--如果是非空闲等待事件,通过等待会话的SID可以求出该会话在执行的SQL
select sql_text from v$sqltext_with_newlines st, v$session se
where st.address = se.sql_address and st.hash_value = se.sql_hash_value and se.sid = &wait_sid order by piece;

----