ADDRCONF(NETDEV_UP): eth0: link is not ready
bnx2: eth0 NIC Copper Link is Up, 100 Mbps full duplex
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
bnx2: eth1: using MSIX
ADDRCONF(NETDEV_UP): eth1: link is not ready
bnx2: eth1 NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
bnx2: eth2: using MSIX
ADDRCONF(NETDEV_UP): eth2: link is not ready
eth0: no IPv6 routers present
bnx2: eth3: using MSIX
vi /etc/modprobe.conf
options bnx2 disable_msi=1
保存退出并重启系统
bnx2: eth0 NIC Copper Link is Up, 100 Mbps full duplex
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
bnx2: eth1: using MSIX
ADDRCONF(NETDEV_UP): eth1: link is not ready
bnx2: eth1 NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
bnx2: eth2: using MSIX
ADDRCONF(NETDEV_UP): eth2: link is not ready
eth0: no IPv6 routers present
bnx2: eth3: using MSIX
vi /etc/modprobe.conf
options bnx2 disable_msi=1
保存退出并重启系统
解决
本文转自 liang3391 51CTO博客，原文链接:http://blog.51cto.com/liang3391/763446
