防火墙规则配置iptables

简介:

Linux防火墙Iptable如何设置只允许某个ip访问80端口,只允许特定ip访问某端口?参考下面命令,只允许46.166.150.22访问本机的80端口。如果要设置其他ip或端口,改改即可。

iptables -I INPUT -p TCP --dport 80 -j DROP
iptables -I INPUT -s 46.166.150.22 -p TCP --dport 80 -j ACCEPT

在root用户下执行上面2行命令后,重启iptables, service iptables restart

查看iptables是否生效:

[root@www.ctohome.com]# iptables -L
Chain INPUT (policy ACCEPT)
target           prot opt source               destination         
ACCEPT     tcp  --  46.166.150.22    anywhere            tcp dpt:http 
DROP         tcp  --  anywhere             anywhere            tcp dpt:http 


Chain FORWARD (policy ACCEPT)
target     prot opt source               destination         

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination        

 上面命令是针对整个服务器(全部ip)禁止80端口,如果只是需要禁止服务器上某个ip地址的80端口,怎么办?

下面的命令是只允许来自174.140.3.190的ip访问服务器上216.99.1.216的80端口

iptables -A FORWARD -s 174.140.3.190 -d 216.99.1.216 -p tcp -m tcp --dport 80 -j ACCEPT 
iptables -A FORWARD -d 216.99.1.216 -p tcp -m tcp --dport 80 -j DROP

如果您不熟悉linux的ssh命令,那么可以在webmin/virtualmin面板中设置,达到相同效果。参考:webmin面板怎样设置允许特定ip访问80端口,禁止80端口

更多iptables参考命令如下:

1.先备份iptables

# cp /etc/sysconfig/iptables /var/tmp

需要开80端口,指定IP和局域网

下面三行的意思:

先关闭所有的80端口

开启ip段192.168.1.0/24端的80口

开启ip段211.123.16.123/24端ip段的80口

# iptables -I INPUT -p tcp --dport 80 -j DROP 
# iptables -I INPUT -s 192.168.1.0/24 -p tcp --dport 80 -j ACCEPT
# iptables -I INPUT -s 211.123.16.123/24 -p tcp --dport 80 -j ACCEPT

以上是临时设置。

2.然后保存iptables

# service iptables save

3.重启防火墙

#service iptables restart

===============以下是转载================================================

以下是端口,先全部封再开某些的IP

iptables -I INPUT -p tcp --dport 9889 -j DROP 
iptables -I INPUT -s 192.168.1.0/24 -p tcp --dport 9889 -j ACCEPT
如果用了NAT转发记得配合以下才能生效

iptables -I FORWARD -p tcp --dport 80 -j DROP 
iptables -I FORWARD -s 192.168.1.0/24 -p tcp --dport 80 -j ACCEPT

 

 

常用的IPTABLES规则如下:
只能收发邮件,别的都关闭
iptables -I Filter -m mac --mac-source 00:0F:EA:25:51:37 -j DROP
iptables -I Filter -m mac --mac-source 00:0F:EA:25:51:37 -p udp --dport 53 -j ACCEPT
iptables -I Filter -m mac --mac-source 00:0F:EA:25:51:37 -p tcp --dport 25 -j ACCEPT
iptables -I Filter -m mac --mac-source 00:0F:EA:25:51:37 -p tcp --dport 110 -j ACCEPT


IPSEC NAT 策略
iptables -I PFWanPriv -d 192.168.100.2 -j ACCEPT
iptables -t nat -A PREROUTING -p tcp --dport 80 -d $INTERNET_ADDR -j DNAT --to-destination 192.168.100.2:80

iptables -t nat -A PREROUTING -p tcp --dport 1723 -d $INTERNET_ADDR -j DNAT --to-destination 192.168.100.2:1723

iptables -t nat -A PREROUTING -p udp --dport 1723 -d $INTERNET_ADDR -j DNAT --to-destination 192.168.100.2:1723

iptables -t nat -A PREROUTING -p udp --dport 500 -d $INTERNET_ADDR -j DNAT --to-destination 192.168.100.2:500

iptables -t nat -A PREROUTING -p udp --dport 4500 -d $INTERNET_ADDR -j DNAT --to-destination 192.168.100.2:4500


FTP服务器的NAT
iptables -I PFWanPriv -p tcp --dport 21 -d 192.168.1.22 -j ACCEPT
iptables -t nat -A PREROUTING -p tcp --dport 21 -d $INTERNET_ADDR -j DNAT --to-destination 192.168.1.22:21


只允许访问指定网址
iptables -A Filter -p udp --dport 53 -j ACCEPT
iptables -A Filter -p tcp --dport 53 -j ACCEPT
iptables -A Filter -d www.ctohome.com -j ACCEPT
iptables -A Filter -d www.guowaivps.com -j ACCEPT
iptables -A Filter -j DROP


开放一个IP的一些端口,其它都封闭
iptables -A Filter -p tcp --dport 80 -s 192.168.1.22 -d www.pconline.com.cn -j ACCEPT
iptables -A Filter -p tcp --dport 25 -s 192.168.1.22 -j ACCEPT
iptables -A Filter -p tcp --dport 109 -s 192.168.1.22 -j ACCEPT
iptables -A Filter -p tcp --dport 110 -s 192.168.1.22 -j ACCEPT
iptables -A Filter -p tcp --dport 53 -j ACCEPT
iptables -A Filter -p udp --dport 53 -j ACCEPT
iptables -A Filter -j DROP


多个端口
iptables -A Filter -p tcp -m multiport --destination-port 22,53,80,110 -s 192.168.20.3 -j REJECT


连续端口
iptables -A Filter -p tcp -m multiport --source-port 22,53,80,110 -s 192.168.20.3 -j REJECT iptables -A Filter -p tcp --source-port 2:80 -s 192.168.20.3 -j REJECT


指定时间上网
iptables -A Filter -s 10.10.10.253 -m time --timestart 6:00 --timestop 11:00 --days Mon,Tue,Wed,Thu,Fri,Sat,Sun -j DROP
iptables -A Filter -m time --timestart 12:00 --timestop 13:00 --days Mon,Tue,Wed,Thu,Fri,Sat,Sun -j ACCEPT
iptables -A Filter -m time --timestart 17:30 --timestop 8:30 --days Mon,Tue,Wed,Thu,Fri,Sat,Sun -j ACCEPT

禁止多个端口服务
iptables -A Filter -m multiport -p tcp --dport 21,23,80 -j ACCEPT


将WAN 口NAT到PC
iptables -t nat -A PREROUTING -i $INTERNET_IF -d $INTERNET_ADDR -j DNAT --to-destination 192.168.0.1


将WAN口8000端口NAT到192。168。100。200的80端口
iptables -t nat -A PREROUTING -p tcp --dport 8000 -d $INTERNET_ADDR -j DNAT --to-destination 192.168.1.22:80


MAIL服务器要转的端口
iptables -t nat -A PREROUTING -p tcp --dport 110 -d $INTERNET_ADDR -j DNAT --to-destination 192.168.1.22:110
iptables -t nat -A PREROUTING -p tcp --dport 25 -d $INTERNET_ADDR -j DNAT --to-destination 192.168.1.22:25


只允许PING 202。96。134。133,别的服务都禁止
iptables -A Filter -p icmp -s 192.168.1.22 -d 202.96.134.133 -j ACCEPT
iptables -A Filter -j DROP

禁用BT配置
iptables –A Filter –p tcp –dport 6000:20000 –j DROP

禁用QQ防火墙配置
iptables -A Filter -p udp --dport ! 53 -j DROP
iptables -A Filter -d 218.17.209.0/24 -j DROP
iptables -A Filter -d 218.18.95.0/24 -j DROP
iptables -A Filter -d 219.133.40.177 -j DROP

基于MAC,只能收发邮件,其它都拒绝
iptables -I Filter -m mac --mac-source 00:0A:EB:97:79:A1 -j DROP
iptables -I Filter -m mac --mac-source 00:0A:EB:97:79:A1 -p tcp --dport 25 -j ACCEPT
iptables -I Filter -m mac --mac-source 00:0A:EB:97:79:A1 -p tcp --dport 110 -j ACCEPT

禁用MSN配置
iptables -A Filter -p udp --dport 9 -j DROP
iptables -A Filter -p tcp --dport 1863 -j DROP
iptables -A Filter -p tcp --dport 80 -d 207.68.178.238 -j DROP
iptables -A Filter -p tcp --dport 80 -d 207.46.110.0/24 -j DROP

只允许PING 202。96。134。133 其它公网IP都不许PING
iptables -A Filter -p icmp -s 192.168.1.22 -d 202.96.134.133 -j ACCEPT
iptables -A Filter -p icmp -j DROP

禁止某个MAC地址访问internet:
iptables -I Filter -m mac --mac-source 00:20:18:8F:72:F8 -j DROP

禁止某个IP地址的PING:
iptables –A Filter –p icmp –s 192.168.0.1 –j DROP

禁止某个IP地址服务:
iptables –A Filter -p tcp -s 192.168.0.1 --dport 80 -j DROP
iptables –A Filter -p udp -s 192.168.0.1 --dport 53 -j DROP

只允许某些服务,其他都拒绝(2条规则)
iptables -A Filter -p tcp -s 192.168.0.1 --dport 1000 -j ACCEPT
iptables -A Filter -j DROP

禁止某个IP地址的某个端口服务
iptables -A Filter -p tcp -s 10.10.10.253 --dport 80 -j ACCEPT
iptables -A Filter -p tcp -s 10.10.10.253 --dport 80 -j DROP

禁止某个MAC地址的某个端口服务

iptables -I Filter -p tcp -m mac --mac-source 00:20:18:8F:72:F8 --dport 80 -j DROP

禁止某个MAC地址访问internet:
iptables -I Filter -m mac --mac-source 00:11:22:33:44:55 -j DROP

禁止某个IP地址的PING:
iptables –A Filter –p icmp –s 192.168.0.1 –j DROP










本文转自 蓝叶子Sheep 51CTO博客,原文链接:http://blog.51cto.com/dellinger/1965229,如需转载请自行联系原作者
目录
相关文章
|
1月前
|
监控 网络协议 安全
华为配置防火墙直连路由器出口实验
华为配置防火墙直连路由器出口实验
|
2月前
|
网络安全 数据中心
百度搜索:蓝易云【Proxmox软件防火墙的配置教程】
现在,你已经完成了Proxmox软件防火墙的配置。请确保你的防火墙规则设置正确,以保护你的Proxmox VE环境免受未经授权的访问和网络攻击。
128 5
|
6月前
|
安全 Linux 网络安全
百度搜索:蓝易云【linux iptables安全技术与防火墙】
请注意,iptables的具体使用方法和配置选项可能会有所不同,取决于Linux发行版和版本。管理员应该参考相关文档和资源,以了解适用于其特定环境的最佳实践和配置方法。
467 0
百度搜索:蓝易云【linux iptables安全技术与防火墙】
|
6月前
|
开发框架 网络协议 Ubuntu
【Linux】配置网络和firewall防火墙(超详细介绍+实战)
【Linux】配置网络和firewall防火墙(超详细介绍+实战)
1326 0
|
6月前
|
网络协议 Linux 网络安全
小白也能看懂的 iptables 防火墙
iptables是Linux中功能最为强大的防火墙软件之一 是一个在 Linux 系统上常用的防火墙工具,用于配置和管理网络数据包过滤规则。它可以通过定义规则集来控制进出系统的网络流量,实现网络安全策略
250 5
|
21天前
|
网络协议 安全 网络安全
二层交换机与防火墙对接上网配置示例
二层交换机指的是仅能够进行二层转发,不能进行三层转发的交换机。也就是说仅支持二层特性,不支持路由等三层特性的交换机。 二层交换机一般部署在接入层,不能作为用户的网关
|
1月前
|
运维 Linux 应用服务中间件
Centos7如何配置firewalld防火墙规则
Centos7如何配置firewalld防火墙规则
46 0
|
5月前
|
网络协议 Linux 网络安全
suse 12 配置ip,dns,网关,hostname,ssh以及关闭防火墙
suse 12 配置ip,dns,网关,hostname,ssh以及关闭防火墙
146 0
|
3月前
|
监控 网络协议 Linux
防火墙规则动态管理器 - firewalld
【1月更文挑战第11天】
51 0
|
3月前
|
网络协议 Shell Linux
系统初始化shell,包括:挂载镜像、搭建yum、设置主机名及IP地址和主机名映射、配置动态IP、关闭防火墙和selinux
系统初始化shell,包括:挂载镜像、搭建yum、设置主机名及IP地址和主机名映射、配置动态IP、关闭防火墙和selinux
37 2