最近接到很多朋友说安装scribe比较麻烦总是失败，特此总结一下安装scribe的方法。下面是个安装过程，比较简单，因而没有特别描述。
1.系统版本：基于CentOS-6.3-x86_64
2.gcc
a)安装版本为4.4.6 官方要求>=3.3.5，但低于4会有问题
b)g++ 如果g++的结果是no inputfiles表示已安装，不是则安装：
yum -y install gcc+ gcc-c++
3.flex
a)确认是否安装，无则yum -y install flex
4.pkgconfig
a)确认是否安装，无则yum -y install pkgconfig
5.m4
a)确认是否安装，无则yum -y install m4
6.python
a)安装版本为2.6.6
b)yum -y install python.x86_64
c)yum -y installpython-devel.x86_64
7.ruby
a)安装版本为1.8.7
b)yum -y install ruby.x86_64
c)yum -y install ruby-devel.x86_64
8.libevent（必须先与thrift安装，很重要）
a)安装版本为1.4.13
b)yum -y install libevent.x86_64
c)yum -y install libevent-devel.x86_64
9.openssl-devel
a)安装版本为1.0.0
b)yum -y install openssl.x86_64
c)yum -y installopenssl-devel.x86_64
10.bz2-devel
a)安装版本为1.0.5
b)yum -y install openssl.x86_64
c)yum -y install openssl-devel.x86_64
11.zlib-devel
a)安装版本为1.2.3
b)yum -y install zlib.x86_64
c)yum -y installzlib-devel.x86_64
12.bison
a)安装版本为2.4.1
b)yum -y install bison.x86_64
c)yum -y installbison-devel.x86_64
13.autoconf
a)安装版本为2.69 thrift要求>=2.65
b)wgetftp://ftp.gnu.org/gnu/autoconf/autoconf-2.69.tar.gz (CentOS6.3yum版本不够高)
c)tar zxvf autoconf-2.69.tar.gz-C /usr/local/
d)cd /usr/local/autoconf-2.69/
e)./configure --prefix=/usr
f)make
g)make install
14.automake
a)安装版本为1.10thrift安装警告，要求>=1.9
b)wgethttp://ftp.gnu.org/gnu/automake/automake-1.10.tar.gz
c)tar zxvf automake-1.10.tar.gz-C /usr/local/
d)cd /usr/local/automake-1.10
e)./configure --prefix=/usr
f)make
g)make install
15.libtool
a)安装版本为2.24
b)wgethttp://ftp.gnu.org/gnu/libtool/libtool-2.2.4.tar.gz
c)tar zxvf automake-1.10.tar.gz -C/usr/local/
d)cd /usr/local/automake-1.10
e)./configure --prefix=/usr
f)make
g)make install
16.安装boost
a)安装版本为1.45.0 官方版本要求>=1.36
b)确认系统中目前没有别的boost版本，有必须清除干净，否则多boost会有各种问题。在CentOS6.3虚拟机中预装了1.41：
rpm -e boost-system-1.41.0-11.el6_1.2.x86_64 –nodeps
rpm -e boost-filesystem-1.41.0-11.el6_1.2.x86_64 --nodeps
c)wgethttp://nchc.dl.sourceforge.net/project/boost/boost/1.45.0/boost_1_45_0.tar.gz
d)tar zxvf boost_1_45_0.tar.gz -C/usr/local/
e)cd /usr/local/boost_1_45_0
f)$./bootstrap.sh
$./bjam -s HAVE_ICU=1 --prefix=/usr/local/boost--includedir=/usr/local/boost/include --libdir=/usr/local/boost/lib
g)./bjaminstall --prefix=/usr/local/boost
h)export BOOST_ROOT=/usr/local/boost
export LD_LIBRARY_PATH=/usr/local/boost/lib:/usr/lib:/usr/local/lib
ldconfig
i)./bootstrap.sh
j)./bjam install
k)在/etc/profile中加入：
export BOOST_ROOT=/usr/local
export LD_LIBRARY_PATH=/usr/local/lib:/usr/lib
source /etc/profile
17.thrift +fb303
a)安装版本为0.7.0官网要求>=0.5.0
b)wgethttp://archive.apache.org/dist/thrift/0.7.0/thrift-0.7.0.tar.gz
c)tar zxvf thrift-0.7.0.tar.gz -C/usr/local/
d)cd /usr/local/thrift-0.7.0
e)chmod +x configure
f)./configure--with-boost=/usr/local/boost
g)make
h)make install
i)开始安装fb303 cd contrib/fb303
j)chmod +x bootstrap.sh
k)./bootstrap.sh --with-boost=/usr/local/boost/
l)./configure
m)Make
n)Make install
18.scribe
a)下载地址https://github.com/facebook/scribe/downloads
b)tar zxvffacebook-scribe-63e4824.tar.gz -C /usr/local/
c)cd facebook-scribe-63e4824
d)./bootstrap.sh--with-boost=/usr/local/boost--prefix=/usr/local/scribe
e)./configure --with-boost=/usr/local/boost--prefix=/usr/local/scribe
f) make
g) make install
至此，安装完成。
本文转自南非蚂蚁51CTO博客，原文链接：http://blog.51cto.com/ixdba/1368792 ，如需转载请自行联系原作者
