Asterisk安装

  1. 云栖社区>
  2. 博客>
  3. 正文

Asterisk安装

长征2号 2018-01-21 12:03:16 浏览1224
展开阅读全文

一、获取asterisk安装包
wget http://downloads.asterisk.org/pub/telephony/asterisk/releases/asterisk-1.6.0.tar.gz
后面的版本号可以改变,可以安装的版本可以参考http://downloads.asterisk.org/pub/telephony/asterisk/releases/

二、解压安装
1.
 [root@~]# tar -zxvf asterisk-1.6.1.9.tar.gz                      // 解压asterisk安装包

2.[root@~]# cd asterisk-1.6.1.9                                        // 进入asterisk安装包

3.[root@asterisk asterisk-1.6.1.9]# ./configure                 // 环境检测和预配置

4.[root@asterisk asterisk-1.6.1.9]# make clean                //清理旧的编译中间文件 

5.[root@asterisk asterisk-1.6.1.9]# make all                     // 从新编译所有文件

+--------- Asterisk Build Complete ---------+
+ Asterisk has successfully been built, and +
+ can be installed by running:              +
+                                           +
+                make install               +
+-------------------------------------------+

安装到这里软件会提示使用make install 来安装asterisk

[root@asterisk asterisk-1.6.1.9]# make install                    // 安装asterisk

+---- Asterisk Installation Complete -------+
+                                           +
+    YOU MUST READ THE SECURITY DOCUMENT    +
+                                           +
+ Asterisk has successfully been installed. +
+ If you would like to install the sample   +
+ configuration files (overwriting any      +
+ existing config files), run:              +
+                                           +
+                make samples               +
+                                           +
+----------------- or ---------------------+
+                                           +
+ You can go ahead and install the asterisk +
+ program documentation now or later run:   +
+                                           +
+               make progdocs               +
+                                           +
+ **Note** This requires that you have      +
+ doxygen installed on your local system    +
+-------------------------------------------+

 

[root@asterisk asterisk-1.6.1.9]# make samples                  // 安装配置模板

到这里askterisk安装完毕。

 

三、启动asterisk

1.输入asterisk,回车

2.输入asterisk -r

四、asterisk配置文件 

asterisk.conf                       //asterisk的主配置文件 一般情况下不需要去改动

sip.conf                               //sip协议主要配置文件

extensions.conf                     //拨号规则配置文件



本文转自einyboy博客园博客,原文链接:http://www.cnblogs.com/einyboy/archive/2012/10/23/2735569.html,如需转载请自行联系原作者。


网友评论

登录后评论
0/500
评论
长征2号
+ 关注