完成框架搭建后，编写自己的主函数起onvif服务
编写makefile
objs = onvif.o onvif_func.o duration.o soapC.o soapServer.o stdsoap2.o
onvif:$(objs)
gcc -o onvif $(objs)
.PHONY:clean
clean:
#-rm onvif
rm *[!C.o].o
发现提示好多函数没有定义，在头文件soapStub.h中定义的，直接把没有定义的函数声明拷贝到一个onvif_func.c中
暂时用ue等工具实现一个空函数，
将；替换为^p{^p^treturn SOAP_OK；^p}
就可以实现素有函数的空实现，然后编译通过就可以了。。。
下面就是启动onvif服务端代码的具体实现了。。
组播setsockopt:no such device问题的解决方法
route add -net 224.0.0.0 netmask 224.0.0.0 eth0
然后
4、ProbeMatches代码
这样就创建了基本的服务端和客户端的代码了，下面需要添加具体的代码了。
其中包括：
(1)创建组播用的udp socket，绑定组播地址为239.255.255.250，端口为3702，因为ws-discovery的组播地址和端口就是为239.255.255.250和3702
(2)在产生的Probe函数中添加ProbeMatches代码
首先是udp socket
- int bind_server_udp1(int server_s)
- {
- struct sockaddr_in local_addr;
- memset(&local_addr,0,sizeof(local_addr));
- local_addr.sin_family = AF_INET;
- local_addr.sin_addr.s_addr = htonl(INADDR_ANY);
- local_addr.sin_port = htons(3702);
- return bind(server_s,(struct sockaddr*)&local_addr,sizeof(local_addr));
- }
- static int create_server_socket_udp(void)
- {
- int server_udp;
- unsigned char one = 1;
- int sock_opt = 1;
- //server_udp = socket(PF_INET, SOCK_DGRAM, 0);
- server_udp = socket(PF_INET, SOCK_DGRAM, IPPROTO_UDP);
- if (server_udp == -1) {
- printf("unable to create socket\n");
- }
- /* reuse socket addr */
- if ((setsockopt(server_udp, SOL_SOCKET, SO_REUSEADDR, (void *) &sock_opt,
- sizeof (sock_opt))) == -1) {
- printf("setsockopt\n");
- }
- if ((setsockopt(server_udp, IPPROTO_IP, IP_MULTICAST_LOOP,
- &one, sizeof (unsigned char))) == -1) {
- printf("setsockopt\n");
- }
- struct ip_mreq mreq;
- mreq.imr_multiaddr.s_addr = inet_addr("239.255.255.250");
- mreq.imr_interface.s_addr = htonl(INADDR_ANY);
- if(setsockopt(server_udp,IPPROTO_IP,IP_ADD_MEMBERSHIP,&mreq,sizeof(mreq))==-1){
- perror("memberchip error\n");
- }
- return server_udp;
- }
需要注意几点：1/设置socket属性SO_REUSEADDR，2、设置socket属性IP_ADD_MEMBERSHIP，目的是让3702的端口能够重复绑定，一家加入组播组。
其次是添加ProbeMatches代码
(1)首先复制client的soap_send___wsdd__ProbeMatches函数到服务端来，因为soap_send___wsdd__ProbeMatches已经写好了用于响应Probe消息的框架了，不用白不用啊。
(2)编写__wsdd__Probe函数，添加如下内容
- int __wsdd__Probe(struct soap* soap, struct wsdd__ProbeType *wsdd__Probe)
- {
- DBG("__wsdd__Probe\n");
- char macaddr[6];
- char _IPAddr[INFO_LENGTH];
- char _HwId[1024];
- wsdd__ProbeMatchesType ProbeMatches;
- ProbeMatches.ProbeMatch = (struct wsdd__ProbeMatchType *)soap_malloc(soap, sizeof(struct wsdd__ProbeMatchType));
- ProbeMatches.ProbeMatch->XAddrs = (char *)soap_malloc(soap, sizeof(char) * INFO_LENGTH);
- ProbeMatches.ProbeMatch->Types = (char *)soap_malloc(soap, sizeof(char) * INFO_LENGTH);
- ProbeMatches.ProbeMatch->Scopes = (struct wsdd__ScopesType*)soap_malloc(soap,sizeof(struct wsdd__ScopesType));
- ProbeMatches.ProbeMatch->wsa__EndpointReference.ReferenceProperties = (struct wsa__ReferencePropertiesType*)soap_malloc(soap,sizeof(struct wsa__ReferencePropertiesType));
- ProbeMatches.ProbeMatch->wsa__EndpointReference.ReferenceParameters = (struct wsa__ReferenceParametersType*)soap_malloc(soap,sizeof(struct wsa__ReferenceParametersType));
- ProbeMatches.ProbeMatch->wsa__EndpointReference.ServiceName = (struct wsa__ServiceNameType*)soap_malloc(soap,sizeof(struct wsa__ServiceNameType));
- ProbeMatches.ProbeMatch->wsa__EndpointReference.PortType = (char **)soap_malloc(soap, sizeof(char *) * SMALL_INFO_LENGTH);
- ProbeMatches.ProbeMatch->wsa__EndpointReference.__any = (char **)soap_malloc(soap, sizeof(char*) * SMALL_INFO_LENGTH);
- ProbeMatches.ProbeMatch->wsa__EndpointReference.__anyAttribute = (char *)soap_malloc(soap, sizeof(char) * SMALL_INFO_LENGTH);
- ProbeMatches.ProbeMatch->wsa__EndpointReference.Address = (char *)soap_malloc(soap, sizeof(char) * INFO_LENGTH);
- macaddr[0]=0x01;macaddr[1]=0x01;macaddr[2]=0x01;macaddr[3]=0x01;macaddr[4]=0x01;macaddr[5]=0x01;
- sprintf(_HwId,"urn:uuid:2419d68a-2dd2-21b2-a205-%02X%02X%02X%02X%02X%02X",macaddr[0], macaddr[1], macaddr[2], macaddr[3], macaddr[4], macaddr[5]);
- sprintf(_IPAddr, "http://%03d.%03d.%1d.%03d/onvif/device_service", 192, 168, 1, 233);
- ProbeMatches.__sizeProbeMatch = 1;
- ProbeMatches.ProbeMatch->Scopes->__item =(char *)soap_malloc(soap, 1024);
- memset(ProbeMatches.ProbeMatch->Scopes->__item,0,sizeof(ProbeMatches.ProbeMatch->Scopes->__item));
- //Scopes MUST BE
- strcat(ProbeMatches.ProbeMatch->Scopes->__item, "onvif://www.onvif.org/type/NetworkVideoTransmitter");
- ProbeMatches.ProbeMatch->Scopes->MatchBy = NULL;
- strcpy(ProbeMatches.ProbeMatch->XAddrs, _IPAddr);
- strcpy(ProbeMatches.ProbeMatch->Types, wsdd__Probe->Types);
- DBG("wsdd__Probe->Types=%s\n",wsdd__Probe->Types);
- ProbeMatches.ProbeMatch->MetadataVersion = 1;
- //ws-discovery规定 为可选项
- ProbeMatches.ProbeMatch->wsa__EndpointReference.ReferenceProperties->__size = 0;
- ProbeMatches.ProbeMatch->wsa__EndpointReference.ReferenceProperties->__any = NULL;
- ProbeMatches.ProbeMatch->wsa__EndpointReference.ReferenceParameters->__size = 0;
- ProbeMatches.ProbeMatch->wsa__EndpointReference.ReferenceParameters->__any = NULL;
- ProbeMatches.ProbeMatch->wsa__EndpointReference.PortType[0] = (char *)soap_malloc(soap, sizeof(char) * SMALL_INFO_LENGTH);
- //ws-discovery规定 为可选项
- strcpy(ProbeMatches.ProbeMatch->wsa__EndpointReference.PortType[0], "ttl");
- ProbeMatches.ProbeMatch->wsa__EndpointReference.ServiceName->__item = NULL;
- ProbeMatches.ProbeMatch->wsa__EndpointReference.ServiceName->PortName = NULL;
- ProbeMatches.ProbeMatch->wsa__EndpointReference.ServiceName->__anyAttribute = NULL;
- ProbeMatches.ProbeMatch->wsa__EndpointReference.__any[0] = (char *)soap_malloc(soap, sizeof(char) * SMALL_INFO_LENGTH);
- strcpy(ProbeMatches.ProbeMatch->wsa__EndpointReference.__any[0], "Any");
- strcpy(ProbeMatches.ProbeMatch->wsa__EndpointReference.__anyAttribute, "Attribute");
- ProbeMatches.ProbeMatch->wsa__EndpointReference.__size = 0;
- strcpy(ProbeMatches.ProbeMatch->wsa__EndpointReference.Address, _HwId);
- /*注释的部分为可选，注释掉onvif test也能发现ws-d*/
- //soap->header->wsa__To = "http://schemas.xmlsoap.org/ws/2004/08/addressing/role/anonymous";
- //soap->header->wsa__Action = "http://schemas.xmlsoap.org/ws/2005/04/discovery/ProbeMatches";
- soap->header->wsa__RelatesTo = (struct wsa__Relationship*)soap_malloc(soap, sizeof(struct wsa__Relationship));
- //it's here
- soap->header->wsa__RelatesTo->__item = soap->header->wsa__MessageID;
- soap->header->wsa__RelatesTo->RelationshipType = NULL;
- soap->header->wsa__RelatesTo->__anyAttribute = NULL;
- soap->header->wsa__MessageID =(char *)soap_malloc(soap, sizeof(char) * INFO_LENGTH);
- strcpy(soap->header->wsa__MessageID,_HwId+4);
- /* send over current socket as HTTP OK response: */
- /*测试过，第二参数必须http，action随意*/
- soap_send___wsdd__ProbeMatches(soap, "http://", NULL, &ProbeMatches);
- return SOAP_OK;
- }
想要写出上述代码，是一定要了解SOAP格式的，在WS-Discovery中描述了discovery所用的soap格式
1首先是了解消息头header和ProbeMatches中的内容，非常重要，可以参考这里http://www.w3.org/Submission/ws-addressing/ 最好详细的学习一下，里面的内容非常重要。
2其次需要理解的是，其实当你看完ws-addressing后你会发现，骨架代码中的结构体和SOAP消息中的内容是一一对应的，例如：
结构体osap->header对应SOAP消息的<SOAP-ENV:Header></SOAP-ENV:Header>中的内容，包含在header里的内容当然会包含在SOAP的header内。例如：
结构体soap->header->wsa__RelatesTo对应的是<wsa:RelatesTo></wsa:RelatesTo>。
3最后需要理解的是，在代码中的"__"双下划线一般对应xml中的命名空间的":"，下划线前是命名空间，后是具体内容。
4最后的最后是要详细的阅读ONVIF Core Specification
下图为响应OnvifTestTool的Probe命令的SOAP消息
结合上图再分析代码就亲切多了。在ONVIF Core Specification的7.3.2.2 Scopes 一节描述了onvif需要的Scopes，这个是需要在程序里填充，具体填充什么，文档里说的很明确：
注意点是在太多，随便漏掉一个都可能会导致搜不到设备，下图是非常重要的一个：
SOAP1.1和SOAP1.2所使用的SOAP-ENV是不同的，ONVIF使用的是SOAP1.1，如果soapcpp2产生的nsmap文件中的SOAP-ENV是SOAP1.2版本的话，那么OnvifTestTool是不会识别设备发出的SOAP消息的。
5、该main函数登场了
- int main()
- {
- int server_udp;
- int retval=0;
- struct soap *soap_udp;
- int fault_flag = 0;
- server_udp = create_server_socket_udp();
- bind_server_udp1(server_udp);
- while(1){
- soap_udp=soap_new();
- soap_init1(soap_udp, SOAP_IO_UDP);
- soap_udp->master = server_udp;
- soap_udp->socket = server_udp;
- soap_udp->errmode = 0;
- soap_udp->bind_flags = 1;
- if (!soap_valid_socket(soap_bind(soap_udp, NULL, 3702, 100)))
- {
- soap_print_fault(soap_udp, stderr);
- }
- fprintf(stderr,"soap_serve starting..\n");
- retval = soap_serve(soap_udp); //阻塞在这里
- fprintf(stderr,"retval=%d\n",retval);
- if(retval && !(fault_flag))
- {
- fault_flag = 1;
- }
- else if(!retval)
- {
- fault_flag = 0;
- }
- soap_destroy(soap_udp);
- soap_end(soap_udp);
- soap_done(soap_udp);
- free(soap_udp);
- }
- }
soap_server函数会一直阻塞，直到接收到SOAP消息，并且该处理是一次性的，所以要将将soap_server放到while里或者独立的线程中。
最后编译运行
问题：哥编译出来的代码，各项都正确啊，就是搜索不到，test工具提示没有返回消息，麻蛋啊。。
自习查看上文才发现，哥的SOAP1.2的，onvif只支持1.1，换了果断可以搜索到。。妹的。。
